• Non-slip Accurate tooth dimension and steel cord ensures minimal stretching, no slippage and constant spends.
• High oil and ozone resistance.
• Special backside surfaces are available. Bando can mold virtually any special configuration on the belt’s backside surface.

Structure

• Polyurethane backing
• Steel cord tensile members (For MXL,Aramid tensile members)
• Polyurethane teeth

• Similar in construction to PowerGrip classical synchronous belts: strong tensile member, precision formed elastomeric teeth and body.
• Neoprene body provide protection against grime, grease, oil and moisture.
• Fibreglass tensile cords.
• Tough nylon facing protects and reinforces the tooth surface.

Advantages

• Twin Power® can transmit up to 100% of its maximum rated load from either side of the belt; alternatively, it can transmit a load on both sides – provided the sum of the loads does not exceed the maximum capacity.
• Non-slip positive drive.
• Runs at low noise.
• Compact, lightweight, and cost-effective drives.
• High tooth jump resistance.
• High-efficiency positive drive.
• Maintenance free.
• No lubrication.

Temperature Range: -35°C to +100°C

• Similar in construction to PowerGrip HTD synchronous belts: strong tensile member, precision formed elastomeric teeth and body.
• Neoprene body provide protection against grime, grease, oil, and moisture.
• Fibreglass tensile cords.
• Tough nylon facing protects and reinforces the tooth surface.

Advantages

• Twin Power can transmit up to 100% of its maximum rated load from either side of the belt; alternatively, it can transmit a load on both sides – provided the sum of the loads does not exceed the maximum capacity.
• Non-slip positive drive.
• Runs at low noise.
• Compact, lightweight, and cost-effective drives.
• High tooth jump resistance.
• High efficiency positive drive.
• Maintenance free.
• No lubrication.

Temperature Range: -35°C to +100°C

• GT (Gates Tooth) modified curvilinear tooth profile.
•  Neoprene body provide protection against grime, grease, oil, and moisture.
• Fibreglass tensile cords.
  Tough nylon facing protects and reinforces the tooth surface.

Advantages

• Twin Power can transmit up to 100% of its maximum rated load from either side of the belt; alternatively, it can transmit a load on both sides – provided the sum of the loads does not exceed the maximum capacity.
• Non-slip positive drive.
• Runs at low noise.
• Compact, lightweight, and cost-effective drives.
• High tooth jump resistance.
• High efficiency positive drive.
• Maintenance free.
• No lubrication.

Temperature Range: -35°C to +100°C

Construction

• Trapezoidal tooth form.
• Precisely formed and accurately spaced elastomeric teeth ensure correct engagement in the pulley grooves.
• Fibreglass tensile cords.
• Tough nylon facing protects and reinforces the tooth surface.

Advantages

• Power transmission of up to 150kW and speeds of up to 10,000 rpm.
• Peripheral speed up to 80 m/s.
• Positive slip-proof engagement.
• Constant angular velocity.
• Efficiencies up to 99%.
• Maintenance free.
• Wide range of load capacities and speed ratios.
•  Back idlers can be used.

Temperature Range
-35°C to +100°C

• Special curvilinear tooth form improves stress distribution and allows higher overall loading.
• Precisely formed and accurately spaced elastomeric teeth ensure correct positioning in the pulley grooves.
• Tough nylon facing protects the tooth surfaces.
• Tensile member provides the required strength combined with excellent flex life and high resistance to elongation.
• Durable elastomeric backing protects against environmental pollution as well as frictional wear if power is transmitted from the back of the belt.
• 8M and 14M pitch belts conform to ISO 13050.

Advantages

• Load capacities up to 1,000 kW.
• No slippage. PowerGrip® HTD® belt teeth mesh smoothly with pulley grooves, reducing speed variations.
• Wide speed range.
• Economical operation. No lubrication needed, no need for adjustment due to stretch and wear.
• High mechanical efficiency. The belt construction minimizes heat build-up and, since friction is not required to transmit the load, belt tensions are reduced.
• Constant driven speeds.
• Long trouble-free service life (because of excellent abrasion resistance) in many applications where metal components like chains and gears wear out in a matter of months.
• PowerGrip® HTD® 14M: static conductive (ISO 1813).

Construction

• Technically advanced compound with fibre glass tensile cord, elastomeric teeth and backing and nylon facing.
• Newly engineered EPDM rubber protects the cords from environmental pollution and frictional wear.
• Helically wound fibre glass tensile member gives enormous strength, flex life and elongation resistance.
• Low friction nylon facing protects the tooth surface against wear.
• Precision-formed and accurately spaced elastomeric teeth.
• Standard widths of 20, 30, 50, 85mm (8MGT); 40, 55, 85, 115, 170mm (14MGT). Other widths available on request.

Benefits

• Substantially increased power ratings: up to 25% more than previous constructions.
• Reduced maintenance costs thanks to longer service life.
• Compact, lightweight, and cost-effective drives.
• High tooth jump resistance.
• No lubrication needed.
• Static conductive (ISO 9563) and can as such be used in the conditions described in the Directive 2014/34/EU- ATEX.
• On demand available in PowerPainT™ construction, to eliminate paint contamination risk.
• Temperature range: -40°C to +140°C (for intermittent use).
• Perfect fit on HTD™ profile pulleys.
• Halogen-free: environmentally friendly.

• GT® (Gates Tooth) modified curvilinear tooth profile.
• Neoprene body provide protection against grime, grease, oil and moisture.
• Fibreglass tensile cords.
• Tough nylon facing protects and reinforces the tooth surface.

Advantages

• Substantially increased power ratings: up to 30% more than previous constructions.
• Reduced maintenance costs due to the belts longer service life.
• Compact, lightweight, and cost effective drives.
• High tooth jump resistance.
• High efficiency positive drive.
• Eliminates contamination.
• Maintenance free.
• Back idlers can be used.

Temperature Range: -35°C to +100°C

*This series are all MTO (make to order) item. Indent order lead time & MOQ applies

Features/Advantages

• Fiberglass tensile cord provides high strength, excellent flex life, and high resistance to elongation.
• Neoprene body provides protection against grime, grease, oil, and moisture.
• Nylon tooth facing provides a durable wear surface for long service life.
• Gates patented tooth profile is designed for use with a specific sprocket groove profile. The sprocket groove-Belt tooth combination increases capacity, while improving registration.
• PowerGrip GT2 greatly exceeds HTD in tooth ratchet resistance.
• Eliminates lubrication and re-tensioning reduce maintenance and labor as compared to roller chain drives.
• PowerGrip GT2 belt sprocket combinations match or exceed the positional accuracy of PowerGrip Timing belt/pulley systems.

WHY POWERGRIP™ GT™ EXTEND™?

HIGH PERFORMANCE

• Higher Power Capacity for Optimum Performance
• Larger Temperature Range
• Improved Chemical Resistance

LOWER TOTAL COST OF OWNERSHIP

• No Lubrication + No Stretching
• Increased Uptime

IMPROVED SAFETY

• Improved Ergonomics
• Low Noise
• Zero Oil — Less Risk for Slipping and Falling

MORE FLEXIBLE FOR MORE APPLICATIONS

• Rust Free + Safe for Use in Food Handling Spaces
• High Tooth Jump Resistance
• Made Without Harmful Chlorinated Compounds

*Note: This series is MTO (Make to Order) item. Indent Lead Time & MOQ applies